![background image](http://html1.mh-extra.com/html/3com/3ccfe575ct/3ccfe575ct_user-manual_440654024.webp)
Windows 95 OSR 2
Insert the PC Card as described in "Installing the PC Card".
1.
Turn the notebook on.
2.
The New Hardware Found window appears briefly.
The Update Device Driver Wizard window states that Windows has detected the PCI Ethernet
Controller.
Insert the LAN Installation Disk and click Next to begin driver installation.
3.
The following message appears:
"Windows driver file search for the device: FE575C-3Com 10/100 LAN CardBus- Fast Ethernet".
Click Finish to accept the driver.
4.
If you are prompted for the LAN Installation Disk during installation, make sure that a: is the
designated path. If during installation, the 3Com driver cannot be found, enter a:\ to point
Windows to the LAN Installation Disk.
If prompted, insert the Windows 95 CD. You can specify a location on your hard disk where the
Windows 95 files reside. Typically, this location is C:\WINDOWS\OPTIONS\CABS. Click OK to
copy the files needed for the Ethernet interface.
Please wait while Windows checks your current network configuration. The required time depends
on your settings for network software components.
A dialog box appears stating that Windows has finished installing the software that your new
hardware device requires.
When Windows 95 prompts whether to reboot the notebook, remove the LAN Installation Disk
from the floppy drive and click Yes.
5.
Setup Procedures
file:///C|/aaafiles/Garfield 26/L10N/User Guide/Source/Final/New Folder/3C575-15.htm (2 of 2) [10/26/1999 8:57:16 AM]