Getting CLI Help
2-9
Getting CLI Help
To access help in the CLI, type
help
and press Enter.
Additional CLI
Information
For a more complete reference to configuring the RAS 1500 through the
CLI, consult the RAS 1500 System Management Guide on the RAS 1500
Resource CD-ROM.
Using the Web
Configuration
Interface from PC
and UNIX-based
Platforms
Once you have configured initial settings, including the IP address, for the
RAS 1500 from either the IP Wizard (PC users) or from the CLI Quick
Setup (UNIX users) you are now ready configure features of the RAS 1500
using the Setup Wizard in the browser-based Web Configuration
Interface.
PC Users: If you used the IP Wizard to configure the IP address, a web
browser would have automatically launched displaying the RAS 1500
Web Configuration Screen.
UNIX Users: If you used the CLI Quick Setup to perform initial
configurations, you must now start a web browser and enter the IP
address of the RAS 1500 you want to configure.
If you want to configure another RAS 1500 that already has an IP
address, start the web browser and enter the IP address of the RAS 1500
that you want to configure.
The Setup Wizard allows you to configure basic features of the RAS 1500.
The procedures for configuring these features using the Setup Wizard are
as follows:
1
Click
Setup Wizard
from the Web Configuration Interface Screen. The
screen shown in Figure 2-4 will appear. Make sure you read the
information provided on this screen; it defines the buttons that will
