1-2
C
HAPTER
1: I
NSTALLING
THE
RAS 1500 H
ARDWARE
Software Requirements
The Web Configuration Interface, the browser-based tool for setting up
features of this release, requires Netscape Navigator 4.0 or Internet
Explorer 4.0 running on Windows 95, 98, or NT 4.0 (with the latest
service pack from Microsoft), or UNIX.
The Web Configuration Interface runs from the Web browser after the IP
address for the RAS 1500 has been configured. If you are running
Windows 95, 98, or NT, the IP address is set using the IP Wizard that you
will access from the splash screen on the CD. If you are using a
UNIX-based platform, the IP address has to be set through the console
monitor.
You Should Have
Received
You should have received the following items with your Router Unit:
■
SuperStack
®
II RAS 1500 Router Unit
■
AC power cord
■
Null modem cable for console management
■
Ethernet cable
■
Cable-guide mounting brackets
■
Flat-head mounting bracket screws
■
Rubber feet
■
Resource CD-ROM
■
User documentation:
■
RAS 1500 Release 2.0 Quick Setup Guide
■
RAS 1500 Release 2.0 Release Notes
■
RAS 1500 Release 2.0 Firmware Upgrade
■
Dual-end compact screwdriver
If your RAS 1500 box does not contain all items listed above, contact
3Com Technical Support in your country. See Appendix D, “Warranty
Information,” for information.
Optional
Components
You can purchase the following items separately:
■
WAN cables: V.35, X.21
■
I/O Modules: 4-port V.34 modem module and cables, 2-port ISDN BRI
module and cables
