8
I
NSTALLATION
FOR
W
INDOWS
FOR
W
ORKGROUPS
Before You Begin
Before you begin installing the network driver, obtain the
Installation Disk
and the
Windows for Workgroups 3.11 installation files (on hard disk, floppy disks, or CD).
Ask your MIS department for the following information:
■
Transport protocol used in the Microsoft Windows Network
■
Name of the NT Server domain or Windows 95/WFW 3.11 Workgroup to
which you belong
The latest versions of Card and Socket Services must be installed on your machine.
Check with your PC manufacturer if you are not sure.
If you installed any other network adapter or network driver in the PC, consult
your MIS department for further instructions.
Installing the Network
Driver
To install the driver for WFW, follow these steps:
1
Using the
Windows
menu, select
Network
.
2
Select
Network Setup
.
3
In the Network Setup dialog box, select the
Networks...
button.
4
Select
Install Microsoft Windows
Network,
and then click
OK
.
5
Select the
Drivers...
button.
6
In the Network Adapters dialog box, click
Add Adapter
. A dialog box appears,
listing the supported network adapters on the disk.
7
From the list of network adapters, select
Unlisted Or Updated Network Adapter
,
and click
OK
.
8
Insert the
LAN Installation Disk
in drive A and click
OK
. A dialog box appears,
prompting you to specify the drive or directory where the EL3C574.DOS driver can
be found.
9
Click
OK
to accept the default directory. Otherwise, if you need to specify the
directory, type a:\NDIS2 and press Enter.
10
Select
FE574BT-3Com 10/100 LAN PCCard-Fast Ethernet
and click
OK
.
11
Click
OK
.
12
In the Network Adapters dialog box, click
Close
.
13
In the Network Setup dialog box, click
OK
.
