28
C
HAPTER
7: I
NSTALLING
NDIS 2 N
ETWORK
D
RIVERS
6
Edit the PROTOCOL.INI file to read as follows:
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[VINES_XIF]
DRIVERNAME = NDISBAN$
BINDINGS = EL3C574
[EL3C574]
DRIVERNAME = EL3C574$
7
Run the PCCONFIG.EXE program located in the \VINES subdirectory.
8
Select option 1,
Network Card Settings
.
9
Select the
NDIS Ethernet
option.
The NDIS workstation screen appears.
10
Enter the IRQ that you selected for the LAN card.
11
Press F10 twice to return to the first menu.
12
Select option 2,
Login Environment Settings
.
13
In the next screen, select option 1,
Default Communications Driver
.
14
In the next screen scroll down to NDIS Ethernet and press Enter.
15
Exit PCCONFIG by pressing F10 to save the new configuration.
16
Edit the CONFIG.SYS file to add the following lines, substituting A: for C: for a
floppy disk installation.
DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES
DEVICE = C:\VINES\EL3C574.DOS
LASTDRIVE = M
17
Edit the AUTOEXEC.BAT file to add the following lines:
cd\vines
ban
cd\
BAN loads the NDISBAN drivers and reads the PCCONFIG.DB file to invoke
changes made during the PCCONFIG stage.
IBM LAN Server 4.0 for
DOS
To install the 3Com NDIS driver (EL3C574.DOS) for IBM LAN Server 4.0, follow
these procedures. DOS must be installed on your PC.
1
Insert the DOS LAN Services Disk 1 into your floppy disk drive.
Switch to that drive, type install, and press Enter
.
2
Select the directory where you want the software installed.
The default directory is C:\NET. A menu appears that provides a list of network
cards.
3
Select
Network card not shown in the list below...
4
Remove the DOS LAN Services Disk 1 disk and insert the
LAN Installation Disk
.
5
Type a:\NDIS2 and press Enter.
The next menu displays
FE574BT-3Com 10/100 LAN PC Card-Fast Ethernet
.
Additional menus will appear.
