32
C
HAPTER
4: C
ONFIGURING
THE
R
OUTER
Powering on the Router
Perform the following check items before powering on the router:
■
Whether the power cord and ground wire are correctly connected.
■
Whether the voltage of the power supply complies with the requirement of the
Router.
■
Whether the console cable is correctly connected, whether the PC or terminal
for configuration is started, and whether the settings are done.
WARNING:
Before switching on the power, locate the power switch in the
equipment room, so that, in case of an electrical accident, power can be turned
off.
1
Power up the Router.
Confirm the following while the router is booting
:
■
Whether the LEDs on the front panel are normal.
■
Whether the configuration terminal display is normal.For the local
configuration, the booting interface displays on the configuration terminal
after the Router is powered on.
2
Upon completion of POST, press <Enter> to begin configuring router.
Startup Process
Self-test on SDRAM
During the process of powering on the router or resetting the router, the
configuration terminal yields the following output first:
Do you want to go on checking sdram? Yes or not(Y/N)
Содержание 3C13840
