3Com 3C13701, Руководство по установке

Страница: 7 / 104

Router 5000 Family Hardware 5
Table 2 lists the attributes of the Router 5000 Family AUX port.
Table 3 lists the attributes of the Router 5000 Family Ethernet port.
Power Supply and
Protection Ground
Table 4 lists specifications for the Router 5000 Family power supply and protection
ground.
LEDs Table below describes the LEDs on the Router 5012
Command line interface
Table 2 Router 5000 Family AUX Port Specifications
Attribute Description
Connector type RJ-45
Interface standard Asynchronous EIA/TIA-232
Baud rate 300 to 115.2 kbps
Services supported Modem dial-up
Backup Operating as the console port when the CON
fails
Protocols supported PPP
SLIP MP
Table 3 Router 5000 Family Ethernet Port Specifications
Attribute Description
Connector type RJ-45
Interface type MDI
Frame format supported Ethernet _ II
Ethernet _ SNAP IEEE 802.2
IEEE 802.3 Operating mode
10/100BASE-T Mbps autosensing Full duplex/half duplex
Network protocol supported IP, Novell IPX
Table 1 Router 5000 Family Console Port Specifications
Attribute Description
Table 4 Router 5000 Family Power Supply and Protection Ground
Item Description
Power supply input Rated Voltage: 100-240V, a.c. 50/60Hz
Max. voltage 90-264V a.c.50/60Hz
Protection ground Connecting to ground through ground wire.
POWER ON — The module (MIM or SIC) is operating
normally.
OFF — No module is installed in the current
slot or the MIM is not operating normally.
SYSTEM Flashing-unit is operating normally
OFF-power is Off