3Com 3C13701, Руководство по установке

Страница: 39 / 104

4-Port Serial MIM 37
Table 30 lists status descriptions of the 4-Port Serial MIM LEDs.
Cables The 4-Port Serial MIM is shipped with a 1-to-4 conversion cable. One end of the
cable has a DB-100 connector for connecting to the module, and the other ends
have DB-50 (female) connectors for connecting to a synchronous/asynchronous
serial port cable.
You must order the cable you need to use with your 4-Port Serial MIM when you
order the module. To prevent damage to your router and to avoid voiding your
warranty, use only the appropriate cable offered by 3Com.
The end of these cables that connects to the conversion cable has a DB-50
connector. The type of network connector depends on the line type or the type of
device at the network end. There are four possible cables that you can use with
the module conversion cable. These cables are described in Table 31.
Figure 39 illustrates the 4-Port Serial MIM conversion cable.
Figure 39 4-Port Serial MIM Conversion Cable
To connect the cable to the 4-Port Serial MIM:
1 Power off the router and cables.
Table 30 4-Port Serial MIM LEDs
LINK
Off: The link is not connected.
Green: The link is connected.
ACT
Off: No data is being transmitted.
Flashing yellow: Data is being transmitted.
0_3
Corresponding port number.
Table 31 1-Port Serial SIC Cables
Cable Network connector
V.24 (EIA/TIA-232) DTE Cable DB-25 (male)
V.24 (EIA/TIA-232) DCE Cable DB-25 (female)
V.35 DTE Cable 34-pin (male)
V.35 DCE Cable 34-pin (female)
CHAN 0C
H
A
N
0
CHAN 1C
H
A
N
1
CHAN 2C
H
A
N
2
CHAN 3C
H
A
N
3
ͨµÀͨ
µ
À
0 0
ͨµÀͨ
µ
À
1 1
ͨµÀͨ
µ
À
2 2
ͨµÀͨ
µ
À
3 3