A
B
O
U
T
T
H
I
S
G
U
I
D
E
Introduction
This guide describes how to install and configure a 3Com® ONline
™
or
ONcore® Edge Router module into the 3Com ONline System Concentrator
or ONcore Switching Hub. In addition, this guide provides troubleshooting
suggestions in case a problem arises with the module.
If the information in the release notes shipped with your product differs from
the information in this guide, follow the release note instructions.
Audience
This guide is intended for the following people at your site:
■
Network manager or administrator
■
Trained hardware installer or service personnel
How to Use This
Guide
Table 1 shows the location of specific information.
Table 1
How to Use This Guide
If you are looking for:
Turn to:
General information about the Edge Router module
Chapter 1
Description of the module architecture
Typical applications of the Edge Router module
Features of the Edge Router module
An overview of the installation and configuration process
Chapter 2
Procedures for unpacking the Edge Router module
Procedures for preparing to install the Edge Router module
Procedures for installing the Edge Router module
An overview of the managed configuration process
Chapter 3
Procedures for attaching a management terminal
Procedures for configuring Edge Router carrier parameters
