360 Vision Predator, Руководство по установке и настройке

Страница: 50 / 56

Video Plugin
• Video Plugin - Choose video plugin, choice of VLC, JPEG (every 5 seconds), or none.
• Unicast Transport - Choice of UDP or TCP.
• Network Latency - Adjust Video player latency/buffer.
• Download - Download video plugin from the camera.
Desktop Application
• Framework - Download framework to run desktop application.
• Application - Download software for the standalone application.
• Notes - Notes on how to install the desktop application.
OK to apply the new settings into the Predator.
Cancel to abandon the changes to the settings.
27 Browser
28 Network Settings Recovery
When network settings are changed, the IP address, Net Mask and Gateway are validated before they
are saved. However if the settings are such that the Predator has settings which mean that it cannot be
seen on the user's network, it may become necessary to use the 'Network Settings Recovery' feature as
described below.
The 'Network Settings Recovery' IP address may conflict with an IP address that is already defined on
the network, it may be necessary to disconnect the Predator from the network and control it locally using
a network connection to a laptop so that the IP address can be set to a suitable setting before the
Predator is reconnected to the main network.
Procedure for 'Network Settings Recovery If necessary disconnect the Predator from the main network.
Tum power to the Predator OFF for 3 seconds.
Tum power to the Predator ON for 4 seconds.
Repeat the above five times.
On the final power ON, leave the power switched on for at least 5 minutes to allow the Predator to
Initialize . (See section Locating the Predator on your Network- page 44)
If using a Dual View please be advised both cameras will be reset to default IP 192.168.1.187
Predator Installation Manual V10_1_29_00 Page 50 of 56
© 360 Vision Technology Ltd