Settings Menu Set-Up
•
Auto Flip - Use this option to set how the camera behaves when full tilt down is reached. Semi -
Requires a second tilt down command when at full tilt down to spin camera 180°. Full
-
Automatically spins the camera 180°
-
Power on Park - When the camera powers up, it will go to a pre-set position. Pre-set 150.
Default is off.
•
Attack Detect -Camera will re-initialize camera motors so that the camera looks back to the
original position, if the camera is physicals forced/moved. Default is off.
•
Upright Mount - Can be used to flip the image, so the camera can be used on a pole or a ceiling.
Default is pole.
•
Sun Shield - Select if a sun shield is present or not.
•
IR Lens option -WID option will use the smaller wider area of illumination for the IR and the NAR
will use the bigger IR but will be a more centralized area of illumination.
S
ettings
Menu
P
elco-
A
ux
•
AUX- Used when using Pelco protocol auxiliary commands. Associate a function of the camera
to a Pelco Aux command. Options of auto focus, digital zoom, auto iris, ir, wiper, washer, osd,
backlight, white light, auto icr, fast shutter, ir-mono, mono, park 150, low power, spare 1.
Settings Menu Zoom/Pre sets
•
Digital Zoom - Use this option to enable or disable digital zoom.
•
Proportional - Automatically reduces/increases pan/tilt speed depending on zoom ratio
•
Zoom Speed -The range of speed 5 to 8 and 8 being the fast zoom to slow down the zoom
change to 5.
•
AF Al When PTZ - Auto focus/iris will activate when PTZ is used, can be switched off. Default is
on.
•
Freeze Pre-sets - This option freezes the image, when moving between pre sets
•
Define Pre-set - Option to enable/disable the setting of pre-sets. Default is on
•
OSD Pre-set
Six-
Go into OSD using pre-set 95 and you can switch off OSD access using pre-set
6
Settings Menu Wiper
•
Wiper Rest - Input a rest time for the wiper
•
Wiper on Time (h) - Input a time period for the wiper operation
•
Wiper on Time (m) - Input a time period for the wiper operation
•
Wiper on Time (s) - Input a time period for the wiper operation
•
Wiper Permanent - Enable or disable the permanent wiper time
period.
Settings Menu Protocols
•
Pelco D Response
-Used on systems using Pelco D protocol where a response from the
camera is required.
Do not use if the system doesn't require a response as it will have an effect on the
telemetry control of the cameras
•
Pelco Static Mode -Disables PTZ control
•
FV White Lights - Used when using Forward Vision protocol, can be used to select what lamps
are controlled from the lamp command
Predator Installation Manual V10_1_29_00
Page 27 of 56
© 360 Vision Technology Ltd
Содержание Predator
