360 Vision Predator, Руководство по установке и настройке

Страница: 48 / 56

26 Maintenance
Version
•
Firmware - Current firmware loaded onto the camera .
Kernel - Current kernel file loaded onto the camera.
Bootloader - Current Bootloader loaded onto the camera.
Hardware - Current mainboard software loaded onto the camera.
Parameters and Settings
Backup Settings - Save - Used to save the camera settings.
The file is displayed as PREDATOR_HD_ YYYYMMDD_HHMM.DAT clicking on this file will
download the file to the PC download folder.
Restore Settings - Browse to the required DAT file and then click restore. The camera will then
apply the settings and reboot the camera.
PLEASE NOTE:- AII saved camera settings including passwords will be uploaded to the camera.
Validate Settings - Used to validate the uploaded settings, after the camera reboot process.
Default Parameters - Reset codec parameters i.e. video stream settings.
Factory reset- This will reboot the camera and all the settings, except IP address will be lost.
Camera Maintenance
• Camera reboot
Soft reset - This will reboot the codec, no settings will be lost.
Hard reset - This will reboot the camera, no settings will be lost.
Firmware Update - Browse to the codec file and then click on update. The camera
codec will then be updated. The Predator camera will re-boot once the update has
been performed.
DO NOT interfere with this process as it may stop the camera fro m working.
Visit the camera Browser page (Framework), 360 Vision Technology web site or contact 360 Vision
Technical Support for the link to the update application & codec update files.
•
•
•
•
Reset Settings
•
Predator Installation Manual V10_1_29_00 Page 48 of 56
© 360 Vision Technology Ltd