© 360 Vision Technology Ltd.
Page 28
Predator Radar Installation Manual V2.1.18.1
•
Enter the required value for the fields Start Angle and End Angle. The directions are entered in
degrees.
• Click Apply followed by Commit Changes.
In the example above, the camera will only be tasked if the target is moving in a direction between 5 and 180
degrees.
Note: Although there are comparators that use a single angle (i.e. “Is Greater Than”), in practise, these are less
useful than those which require a start and end direction. When a target is moving they do not keep to a single
bearing, even when moving very straight, therefore we would always recommend using either “Is Between” or
“Is Outside”.
13.3.1 How to Identify the Direction Required?
It can be awkward to work out in which direction you want the rule to be active. Remember that the direction
rule covers the course of the target, not the angle from the radar to the track:
The easiest method to identify which angles / directions you want to use is by allowing the Predator Radar
to track targets without the direction rule enabled. Whenever a target is tracked by the radar the On Screen
Display (OSD) will show the current course/direction of the target:
!
Incorrect
Direction is not from the radar to
the target
Correct
Direction is based on the direction
that the target is moving in
