arch aSSeMBLY
Page 2
The wood arch is intended to be installed with the slats angled down
toward the window. This provides for maximum light control and will
keep the sun’s rays from damaging furniture and carpet. You will be
unable to install a stand alone arch with the slats angled in the
opposite direction.
WARNING:
3 Day Blinds recommends that you follow these
instructions carefully. If you fail to attach the arch to a window sill
or wood blind support brackets, the arch could be dislodged and
fall from the window. This could result in damage to property. It
could also seriously harm people and/or animals.
• Remove the arch components
from their protective wrapping.
DO NOT remove the shims
located in the grooves.
• Attach the vertical supports to
the bottom rail using a Phillips
screwdriver and the #8 x
3
/
4
”
screws. The vertical supports
are numbered starting at 1 and
correspond to the same number
written inside the groove on the
bottom rail. Be careful not to
over-tighten the screws, as this
may crack the vertical supports.
Make sure the screws are flush
with the face of the bottom rail
and all vertical supports are
facing the same direction.
