18
19
2VV.
Creating innovative solutions for you and your business since 1995.
7. OPERATION
This MENU allows for setting the behavior of other regulators
connected as "SLAVE”
MENU - WATER ANTIFREEZE
This MENU allows for setting the mixing shutters, which
intake exterior air into the interior space. This is active only in
DAY mode with Outlet limitation room enabled in MENU 37.
MENU for fan settings
After reaching the desired temperature in the space, the fan and the
heating are deactivated. During temperature drops by the set hyster-
esis,
the fan and heating once again reactivate.
Setting the shutters in mixing
mode.
Delay for instruction of
mixing mode
when toggling DAY/NIGHT
Setting minimum fan power.
Setting maximum fan
power.
When exceeding the desired
temperature by a set amount
(Fan Off), the fan is deactivated.
Maximum temperature
for return water
Setting periods for
blower movement.
Only at 0:00 time and
in Standby mode.
The minimum throughput of water can be set only for analogue fan control.
This function is active in Standby mode as well.
MENU - Adv. WATER SETTING
MENU - Damper control
MENU - Fan limits
MENU for setting exhaust temperature limits.
Setting exhaust tempera
-
ture limits after reaching a
temperature in the space.
If the exhaust temperature
set decreased by the desired
temperature (Room alarm),
the mixing shutter will be
closed, the contact alarm
heater will be bound and an
error will be reported.
MENU - Fan limits
MENU - OTHER SETTINGS
This MENU allows for setting other parameters
Ad 1)
Ad 1)
- Option to set CAN address of control panel such that
up to 2 control panels can be connected to MASTER regulation
Options: CP 1 = control panel has address 1
CP 2 = control panel has address 2
Activation or deactivation
of automatic change
of summer/winter time
