2N TELEKOMUNIKACE a.s., www.2n.cz
90/143
Destination address of message outgoing to SMPP
– set how to modify the
message addressee telephone number to be sent via SMPP.
Never replace original address
Replace if the original address is empty
Always replace original address
address – enter addressee's new telephone number
TON – type of number
NPI – numbering plan indicator
Incoming SMS routing
This section helps you set the incoming SMS routing rules, which are included in the
incoming SMS routing table.
Add record
Disabled – enable/disable the selected routing rule.
Message from SMS group – select the SMS group that receives the SMS.
Action type – select the action for the received SMS:
Autoclip routing – the incoming SMS will be routed according to the
AutoCLIP table records.
Deliver to user – the SMS will be delivered to the selected user.
Drop message – the SMS will be dropped.
Deliver to user – select the SMS addressee. This option is valid only if Action
is selected.
type = Deliver to user
Time limitation – set the rule validity time.
Days limitation – set the days in a week on which the rule shall be valid.
Clip mask – set the filter for the SMS sender telephone number (CLIP). If the
selected mask matches the CLIP, the SMS will be routed according to the rules
set above. If not, the SMS will be dropped. The * character replaces any string of
characters (789789789=789*, e.g.). The ? character replaces any character
(789789789=789??????, e.g.).
Text begin – set the string to be matched against the SMS text beginning. If a
match is found, the SMS will be routed according to the rules set above.
