2N TELEKOMUNIKACE a.s., www.2n.cz
80/143
Autodial – enable/disable CLIP routing for the selected CLIP.
Reject call – reject call for the selected CLIP.
Ignore call – ignore call for the selected CLIP.
Tone dial-in – incoming GSM calls is accepted + dialtone is activated for
the selected CLIP.
DISA message dial-in – incoming GSM calls is ac voice message is
activated for the selected CLIP.
Dial to VoIP/FXS – VoIP destination number for the CLIP routing function.
Auto CallBack – enable/disable the CallBack function for the selected CLIP
according to the Gateway configuration / GSM basic settings / Calls / Source
setting.
interface for CallBack
– set the maximum call duration (minutes).
Call duration limit
Tip
CallBack detects the CLIP from right to left. Thus, configure 10 rules for
all the incoming CLIPs to make CallBack work properly. Each of the rules
must contain one of the CLIPs: 0,1,2,3,4,5,6,7,8,9.
Note
Remember to activate the CallBack mode in the
GSM incoming groups
window for a proper CallBack function.
The maximum count of CLIP routing table records is 96.
Mobility Extension
The table registers the Mobility Extension users.
Name – enter the user name for calling to VoIP.
User – enter the registration user name for VoIP.
Password – enter the registration user password for VoIP.
GSM number (CLIP) – enter the user SIM card CLIP.
Follow me function – enable/disable call forwarding to a mobile user station
(based on CLIP).
SMS at no answer function – enable/disable sending of information SMS on
missed calls.
