2N ISDN BRI GSM, Руководство пользователя

Страница: 48 / 109

2N - ISDN BRI GSM Enterprise Gateway
DISA Message Recording using terminal and GSM phone
Recording of DISA message
Open terminal window (see Subs 9).
•
Establish connection with your GSM phone using AT
command:
at!sg0=phone_number_of_your_GSM_phone
•
Accept incoming call from your GSM gateway by GSM phone.
(CLIP of SIM card plugged in SIM card holder 1)
•
Enter AT command at!m=record in terminal window which
results in recording of DISA message (60 s max)
•
To stop recording of DISA message press ENTER
•
Finish the phone call by hanging up or entering of AT
command at!d
Erasing of DISA Message
To get an information on recorded DISA Message enter AT
command
at!m=status . To erase DISA message enter AT
command at!m=erese in terminal window.
Recording of DISA Message using terminal and PC
Recording the voice message into your PC keep the maximum
length of 65 s, compression according to the ISDN A-law codec,
mono, sampling frequency of 8 kHz. The voice message recording
program is part of your BRI GSM gateway software delivery.
Summary of parameters the file must meet is in table
Chyba!
Nenalezen zdroj odkaz ů .
below. Name the file Disa.wav and
upload it to BRI Enteprise using a terminal and the XMODEM
transmission protocol.
DISA Voice File Parameters
Sound format Wav
Sampling frequency 8 kHz
Count of channels 1 mono
Codec ISDN A-law
Tab. 4 DISA Message File Parameters
38