background image

2N TELEKOMUNIKACE a.s., www.2n.cz

65/66

The consumer shall, without delay, change the access password for the product after 

installation. The manufacturer shall not be held liable or responsible for any damage 

incurred by the consumer in connection with the use of the original password.

The manufacturer also assumes no responsibility for additional costs incurred by the 

consumer as a result of making calls using a line with an increased tariff.

Electric Waste and Used Battery Pack Handling

Do not place used electric devices and battery packs into municipal waste containers. 

An undue disposal thereof might impair the environment!

Deliver  your  expired  electric  appliances  and  battery  packs  removed  from  them  to 

dedicated  dumpsites  or  containers  or  give  them  back  to  the  dealer  or  manufacturer 

for environmental-friendly disposal. The dealer or manufacturer shall take the product 

back  free  of  charge  and  without  requiring  another  purchase.  Make  sure  that  the 

devices to be disposed of are complete.

Do  not  throw  battery  packs  into  fire.  Battery  packs  may  not  be  taken  into  parts  or 

short-circuited either.

Содержание IP Solo



































































Отзывы: