2N IP Solo, Руководство по установке

Страница: 22 / 66

2N TELEKOMUNIKACE a.s., www.2n.cz 22/66
Surface mounting
concrete and steel structures, entry barrier columns, interior, etc.
What you need for mounting:
2N Helios IP Solo
®
For not flat surface we recommend to use the module number backplate Part No.
. 9155068
Warning
2N Helios IP Solo
®
is not suitable for installation on glass.
Caution
The warranty does not apply to the product defects and failures arisen
as a result of improper mounting (in contradiction herewith). The
manufacturer is neither liable for damage caused by theft within an area
that is accessible after the attached electric lock is switched. The
product is not designed as a burglar protection device except when
used in combination with a standard lock, which has the security
function.
When the proper mounting instructions are not met, water might get in
and destroy the electronics. It is because the communicator circuits are
under continuous voltage and water infiltration causes an electro-
chemical reaction. The manufacturer’s warranty shall be void for
products damaged in this way!
Do not remove the plastic foil on the inner frame seal to avoid water
infiltration and electronic destruction.