2N ATEUS, Руководство пользователя

Страница: 32 / 58

30
3/ The program now uploads your new firmware automatically – the gateway is reset
several times during the process. Do not interrupt the procedure to avoid wrong
uploading and gateway breakdown!
Load trace – stores a record of the gateway operation and faults on a disk/in the
current directory (the contents of this record can be selected in the “System
Parameters > Trace“ menu).
Upload DISA – puts the DISA message on the disk (in the current directory) in the A-
LAW format.
Download DISA – stores the DISA message into the gateway. For downloading
conditions see 5.8. The file to be stored must be named “ disa.vce ”! If you record the
message in the said way, you can check it by calling the incoming line with active DISA
(i.e. the control using an ISDN telephone as mentioned in 5.8 does not work!).
Download CALLBACK – save CALLBACK voice file to disk (to current directory) in
format A-LAW
Upload CALLBACK – save CALLBACK voice file to gateway. For downloading
conditions see 5.8. The file to be stored must be named “ callback.vce ”!
Saving voice messages – saves the “ Serv.vce ” file, other gateway communication
messages, such as telephone-based switch control, telephone-based PIN entering,
etc. (This file must meet the same conditions as the DISA message file).
6.4.4. Setting menu
It contains communication setting (see fig. 23) and program language selecting menus.
•
Communication
Serial port – select the serial port to which your gateway is connected to.
Transmission rate – is recommended and set by default at “115200Bd“.
Parity – is set by default and should be “none”.
Number of stop-bits – is set by default and should be 1.
Number of data bits – is set by default and should be 8 for correct
communication.
Use modem – sets gate communication via a modem.
Initialisation – sends an initialisation command to the ISDN modem (here select
the AT command for the modem to use x72 (x75) transparent).
6.4.5. Help menu
This menu contains the ISDN GSM Lite program help, instructions to the help and details
on the program version.