2N ATEUS, Руководство пользователя

Страница: 44 / 58

42
CLIP routing
This chart determines behaviour of the intelligent routing of incoming calls. In individual
lines the sequence goes like this:
CLIP – calling line identification presentation
Extension – DDI number (to which the call should be connected)
Port – port to which the destined ISDN terminal is connected
Validity – total time (days – max. 250) of record validity if 0 means permanently valid
Mode – defines whether the “Remaining days” item should be restored to the “Validity”
value if an incoming call with this CLIP comes (1 – restored, 0 – not restored)
Remaining days – number of days until the item is deleted from the chart (days are
always deducted at midnight).
* Note: Items can be added to the CLIP Routing chart using a telephone (see 5.6).
To make CLIP work properly, satisfy the following conditions:
Complete the correct national prefix in the National Destination chart (see 6.5.4.3 page
44).
The international installation site must be identical with the international prefix included in
the CLIP Routing chart (see 6.5.4.2 page 43).
Enter the number in the long-distance call format (0603xxxxxx, 02xxxxxxxx, e.g.).
Fig.37 : Routing – CLIP routing