2N Telekomunikace LTE Verso, Руководство по установке

Страница: 168 / 213

Installation manual 2N® LTE Verso
168 / 213
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Touch keypad & RFID reader 125kHz, secured 13.56MHz, NFC
The touch keypad with a combined 125 kHz and secured 13.56 MHz card ( Part No. 9155083 )
reader is one of the 2N
®
IP/LTE Verso intercom elements and is used for code/card access
control, making user calls and/or other functions. The keypad surface is very sensitive yet
weatherproof at the same time.
NFC – a licensed function, for 2N
®
Mobile Key for Android only.
The module contains two bus connectors.
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key
HID SE (Seos, iClass SE, Mifare SE)
Induction Loop
The Induction loop is one of the 2N
®
IP/ LTE Verso intercom elements and is used to transmit an
audio signal directly into a hearing aid via a magnetic field.
The module contains two 2N
®
IP/LTE Verso bus connectors.
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
Used mode: Telecoil (also referred to as t-switch or t-coil)
Maximum power: 2W
Frequency range: 100 Hz – 5 kHz / ± 3 dB
•
Tip
To accelerate card reading, you are recommended to select the card types used by
the user in the module settings.
