2N Telekomunikace LTE Verso, Руководство по установке

Страница: 170 / 213

Installation manual 2N® LTE Verso
170 / 213
•
•
•
•
•
•
•
•
•
•
Bluetooth Reader
The Bluetooth reader ( Part No. 9155046 ) is one of the 2N
®
IP/LTE Verso intercom
elements and helps authenticate and subsequently open doors using Android and iOS
based smartphones via the Bluetooth protocol 4.0 as RFID card replacement. Install
the 2N
®
Mobile Key application from Google Play and Appstore to m ake authentication
work properly. The application requires phones with Android OS 6 and higher and iOS 12
and higher.
The module contains two 2N
®
IP/LTE Verso bus connectors.
The two connectors are fully interchangeable and can be used both as inputs from the
main unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The package includes a 220 mm long interconnecting cable.
The module uses the 2.4 GHz frequency.
IDs from the following smart phones can be read:
Android 6 and higher
iOS 12 and higher
I/O
The I/O (Part No. 9155034) is one of the 2N
®
IP/ LTE Verso intercom elements and is used for
extending the number of inputs and outputs.
The module contains two 2N
®
IP/LTE Verso bus connectors.
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
•
•
Note
A higher moisture may deteriorate finger papillary line scanning. You are advised
to dry your finger and the reader scanning surface for successful authentication.
Fingerprint scanning can be rather difficult with older persons whose papillary
lines are no so distinct (lower finger elasticity due to age requires a higher pressure
for scanning and the fingerprint might be blurred).

•
Caution
2N
®
LTE Verso supports one Bluetooth module connection only. If connected at
the same time, multiple Bluetooth modules may result in an undesired behaviour.
