2N Telekomunikace ATEUS BLUESTAR, Руководство пользователя

Страница: 57 / 71

55
hout ...hour when the modules start to log out
randomly
hin ...hour when the modules start to log in
randomly
min ...minimal number of modules in the group
(2..15) which remains always logged in
AT%X80=name/pass User name/password for access via IP port (this
parameter is only write only- you can´t see its
value)
11.2.4. System control
AT&Bxx=DOWN Transfer of GSM board No. xx into the sleep
mode
AT&BPR=DOWN Transfer of PRI board into the sleep mode
AT&BALL=DOWN Transfer of all GSM boards into the sleep mode
AT&Bxx=RESET Reset of GSM board No. xx
AT&BPR=RESET Reset of PRI board
AT&BALL=RESET Reset of all GSM boards
AT&BSYS=RESET Reset of BLUESTAR
AT&Qxx=RESET Reset of GSM module No xx
AT&Qxx=BLOCK Block of GSM module No xx
11.2.5. ISDN PRI Board Settings
AT%I00= ISDN PRI port type (TE/S ; TE/M ; NT/S ; NT/M)
AT%I01= TEI ISDN PRI connections (0-63)
AT%I02=ppp,ppp,ppp… List of numbers dialed in incoming calls from GSM (max.
63 characters, numbers are separated with a comma)
AT%I03=ppp Prefix to be sent before tone dialing
AT%I05=c1,c2,c3,c4 Number of causes sent to PRI ISDN (in the
ReleaseComplete) whenever an incoming call from PRI
ISDN is rejected.
AT%I08=mode,min,max,
tout Incomming calls from GSM to ISDN
Mode : 0 – reject 1 – ignore calls 2 – accept calls and
send voice message 3 – accept calls and send dial tone
Basic GSM settings
AT%G00=rr,gggggg,gggggg,gg
gggg,gggggg,gggggg g,r=Number of GSM group for each GSM module
AT%G01=mode,atms,atfs Voice processing settings (for GM22 GSM
modules only)
mode – algorithm (0-none, 1-semiduplex, 2-fullduplex)
atms,atfs – transit, receive gain (3=+5db, 1=+2.5db, 0=0db,
2=-2.5db, 4=-5d
AT%G02=mode,atms,atfs Voice processing settings (for TC35 GSM
modules only)
mode – algorithm (2-echo canceler)
atms,atfs – transit, receive gain (3=+5db, 1=+2.5db, 0=0db,
2=-2.5db, 4=-5d
AT%G06=mmdd,…mmdd… List of holiday days (mm-month;dd-day) max