2N Telekomunikace ATEUS BLUESTAR, Руководство пользователя

Страница: 49 / 71

47
- Receive incoming calls + dialtone – incoming calls will be routed to ISDN interface.
Minimum digits in DTMF – Minimun of DTMF digits in DTMF dial-in
Maximum digits in DTMF – Maximum number of digits to be DTMF-dialed for incoming
calls. After the last DTMF dialing, which is the maximum, an ISDN call is made automatically
with the currently selected DISA (or DTMF prefix if necessary).
Timeout while imputing DTMF digits(s) – time (in seconds) for the BLUESTAR to wait for
the first and next DTMF digit. After this timeout, either the DTMF number received so far is
dialed into the ISDN or, if no DTMF digit is dialed, a number is dialed from the “List of dialed
numbers”.
List of called numbers - list of numbers to dialed automatically gradually (in the case of
unavailability or busy) if no DTMF dialing (DISA) is made.
Prefix before DISA preselection – prefix which the gateway add before dialed DTMF dial in.
For example : received DTFM digits are 487 and this prefix is 6655. The gateway will send to
PRI ISDN interface number 6655487.
CLIP - With this parameter you can change digit „+“ from CLIP by different digit(s). In case that
you leave blank this parameter, the gateway will only remove „+“ from CLIP
9.5.4.5 Network list
Tables of prefixes for GSM operators.
Table of replaced prefixes – table of prefix, that are to replaced (in outgoing call from PRI
ISDN to GSM) to another prefixes (e.g. +420 replaced by 0)*
*this change will be made before find right prefix in table of prefixes!
Table of prefix – table of called prefixes from PRI ISDN. At filling-in this table you can set the
length of called number. In case that this parameter you didn’t fill-in, BLUESTAR use parameter
„Default number of digits“
Network number – ID number of GSM network for these prefixes*
*this parameter will be used in higher version of firmware for pseudotariffication. Please fill-in
this parameter.