45
-
Random
– SIM cards will be switched at random time (length of this time will be generated
between two times in parameter “Interval of change SIM card” (see below)
-
By time and limit; then SIM 1
– SIM cards will be switched according to time and day and credit.
In case that all SIM card have no credit (counters are empty), the SIM card in position one will be
activated.
-
Random and limit ; then SIM 1
– SIM cards will be switched at random time and by credit. In
case that all SIM card have no credit (counters are empty), the SIM card in position one will be
activated
Last searched SIM –
(SIM1 – SIM8) : After start the gateway is automaticly checking all SIM
position for SIM card. With this parameters you can limit holders which will be tested.
Disconnect call
:
- Never
– Call wont be never disconnect (in case that time of use or limet is exceeded). The
switch to another SIM card will be allowed after call hung-up)
- SIM limit exceeded
– The call will be disconnected immediately when the SIM card’s call
limit is exceeded.
- Switch to another SIM card
- The call will be disconnected immediately when the SIM
card will be out of time of use.
Day of delete statistics in group
- x. day in month when the statisctics of the GSM group will be
deleted.
Delay for send CONNECT (s)
– Delay for send ISDN message CONNECT to ISDN PRI interface
(in case that BLUESTAR is building call from ISDN to GSM).
Timeout for send ALERTING(s)
– Timeout for send the ISDN message ALERTING to ISDN PRI
interface (in case that BLUESTAR is building call from ISDN to GSM). 0= switched off
Bookmarks SIM1- SIM4
– In these bookmarks is necessary right set-up parameters of each SIM
card..
Roaming enabled for network –
Internation ID of GSM network (MCC+MNC) which is enabled
for roaming. Please leave it free for cases that you don’t want to enable roaming
CLIR –
This parameter decides whether the gateway SIM card subscriber number shall be
dialed into the GSM network or not. All BLUESTAR outgoing calls present the calling line
numbers as inserted in the SIM card in the BLUESTAR. Technically, it is impossible to transfer
number information from the ISDN into the GSM network (the opposite function is supported,
i.e. all ISDN subscribers can see the GSM calling number). Hence, it is mostly purposeful to
restrict the calling line identification (activate CLIR) to avoid problems with backcalls to the
gateway in the case of a missed GSM call, for example. Select this parameter for each GSM
group separately.
−
Default -
settings according your GSM provider’s network.
−
Enabled (CLIP-off)** –
The CLIR function is activated, no numbers are sent to the
GSM network.
CAUTION!
Your GSM provider must support
and activate
this service!
If not, the number will still be sent to the network and outgoing calls will be impossible
with some providers.
−
Disabled (CLIP-on)
- the CLIR function is disabled, numbers are sent. Your GSM
provider must support and activate this service! If not, the number will still be sent to
the network and outgoing calls will be impossible with some providers.
Содержание ATEUS BLUESTAR
Страница 1: ...A AT TE EU US S B BL LU UE ES ST TA AR R User s Manual Version 2 0...
Страница 2: ......
