2N Telekomunikace ATEUS BLUESTAR, Руководство пользователя

Страница: 29 / 71

27
- Set right setting of PRI ISDN interfaces. Details about installtion settings you also find
on page
Chyba! Nenalezen zdroj odkazů.Chyba! Záložka není definována.
section Chyba! Nenalezen zdroj odkazů. . In case that layers 1 and 2 on PRI
interface are not established, please recheck the right configuration of BLUESTAR
and your router/PBX. For actual status of PRI interface please open item in top menu
Gateway Control, Diagnostics and select PRI.
Descrition of this window you find on pages 32,
Chyba! Záložka není definována.
sections 9.4.3, Chyba! Nenalezen zdroj odkazů. .
6/ Section GSM, A
SSIGMENT TO
GSM
GROUP
(description on page Chyba! Záložka není
definována. section Chyba! Nenalezen zdroj odkazů. )
- Divide the GSM modules (cards) to outgoing and incomming GSM groups accorting to
you installation requiements
7/ Section GSM, GSM
OUGOING GROUPS
(description on page Chyba! Záložka není
definována. section Chyba! Nenalezen zdroj odkazů. )
-
for first start select parameter sMode of switching SIM card and last searched SIM to
SIM1 for each GSM group which you are using
8/ Section GSM, N
ETWORK
L
IST
(description on page Chyba! Záložka není definována. section
Chyba! Nenalezen zdroj odkazů. )
-
in case that you using more GSM operator please make delete of all eight Network
lists and add to Network list 1 prefixes for GSM operator 1, to Network list 2 for GSM
operator 2 etc… Please don’t remember to add also right length of dialed number for
each prefix.
9/ Section LCR
TABLE
(description on page Chyba! Záložka není definována. section Chyba!
Nenalezen zdroj odkazů. )
-
here you have possibility set in which time which prefixes (saved in network lists) will
be routed to which GSM group. You can select more GSM groups in one line –
gateway will try use second GSM group in case that first GSM group is not available
or busy. Also you can set more tries for one GSM group > for increase ASR…
10/ In top menu in G
ATEWAY CONTROL
, open item
DATE AND TIME
for set right time and date in the
gateway
11/ In top menu in G
ATEWAY CONTROL
, open item
CHANGE USER NAME AND PASSWORD
to change
access rights for remote control via Telnet or PRI ISDN
12/ Save the configuration to BLUESTAR
13/ Plug-in the SIM cards and connect antennas and make restart of the gateway.
In case that you have problem with right function please read carefully this manual, check all
parameters. Also you can contact us by e-mail
techsupport@2n.cz . To email please write detail
description of problem and also attach the configuration file of the gateway (config.cfg)