2N Telekomunikace 2N Indoor Compact, Руководство пользователя

Страница: 52 / 131

2N TELEKOMUNIKACE a.s., www.2n.cz 52/131
Local Call Receiving Mode – set the way of receiving incoming local calls. The
following three options are available:
Always busy – the device rejects incoming calls.
Manual Pickup – the device rings to signal incoming calls and the user can
press a keypad button to pick up.
Automatic – the device picks up incoming calls automatically. You can set
the call receiving mode for each SIP account separately.
Pick up in – this parameter is only active when the Automatic pickup mode is
enabled. The call is picked up automatically after the preset timeout elapses.
Use Do Not Disturbe for the doorbell button too – if this function is activated,
the device shall not ring when the doorbell button is pressed.
Ring Time Limit – set the maximum call setup and ringing time in which all
outgoing calls are automatically terminated. If the calls are routed to the GSM
network via GSM gateways, you are advised to set a value longer than 20 s.
Minimum value: 1 s, maximum value: 600 s. Set 0 to disable the time parameter.
Audio
Enable/disable the use of audio codecs for call setups and set their priorities.