1.
Check mast
rope
s for excessive wear or damage. Make sure the
rope
s are properly centered in
each pulley.
2. C
heck the mast electrical cord for damage.
3
. Pull the locking pin out (A), crank the manual winch in anti-clockwise direction (B), lower the mast to its original
static height and make sure the steel rope is orderly (C).
WARNING
Do not
operate the unit
if the insulation on the electrical cord is cut or worn through.
Bare wires in contact with the mast or frame may energize the trailer and cause electrocution.
Repair or replace cord.
25
A
B
C
LOWER THE MAST