1.
Place the trailer on firm ground that is relatively flat. This will make it easier to level the tower.
Appl
y
the
hand
brake and block the wheels on the trailer to keep it from moving.
2.
Connect a good earthen ground to the grounding stud on the base of mast.
3.
Pull the locking pin on the
jockey wheel
and rotate it 90º until the spring loaded pin snaps back into
place.
Turn the jack handle
anti
clockwise
to raise the trailer drawbar off of the towing vehicle.
4.
Pull the locking pins
on the outriggers and extend each outrigger until the
locking
pin snaps back into place
(A).
Pull out the locking pin in the bottom of the outrigger and fit it to the third hole above (B). Apply the same
action for the other 3 outriggers. Turn the jack handle clockwise to start leveling the trailer. Adjust all four jacks
by turning their handles clockwise until they are firmly in contact with the ground and the trailer is as level as
possible
(
C
).
(D is the level meter.)
SOLAR TRAILER
SET UP
WARNING
The tower extends up to 30 ft (9.14 m). Make sure area
above
the trailer is open and clear of overhead wires and
obstructions.
A
B
C
D
Jockey
Wheel
Stabiliser
Block the Chock
Mast
12