34
2GIG EDGE User Guide
Activate an Emergency Alarm
When activated, the system immediately goes into the
alarm state . The Control Panel emits a loud, patterned
warning siren and continues to sound until the system
, pg 26) . The
system also transmits an Emergency Report to the
Central Station .
Activate a Manual Panic, Fire or Emergency
Alarm
To activate a manual alarm:
1 .
Tap
.
2 .
Touch and hold the
Panic
,
Fire
, or
Emergency
button for two (2) seconds .
NOTE:
Consult your installer about your system’s
emergency key settings . Typically, all three buttons
are enabled and visible on the touchscreen
by default . However, some systems may be
configured to hide one or more of these buttons.
3 .
Once the alarm situation is resolved, clear the
alarm by following the steps available in the
section, page 30 .
2GIG EDGE Panel—Alarm Button
24-Hour Alarm Buttons
PANEL INFORMATION
The
Panel Information
menu provides access to the
system’s History, System information, Dealer Information
and Regulatory & Compliance information .
Tapping the
2GIG Logo
on the
Home
screen accesses
the menu .
Panel Information
History
The
History
screen shows a chronological log of system events . Each event is recorded with a date and time stamp:
»
Alarms:
Keeps a record of when alarm conditions are triggered and cleared .
»
Arms/Disarms:
Keeps a record of when the system is armed and disarmed .
»
Bypasses:
Keeps a record of when zone sensors are bypassed and unbypassed .
»
Alerts:
Keeps a record of when the 2GIG EDGE Panel or a zone issue an alert . For example, low battery, AC
power loss, or tamper conditions .