P O Box 159 • Crestwood, KY 40014 • (877) 243-0042 • (502) 243-0039 fax
1.
So, for example, if the TV2 is set to Zoom=2X then each column will show two
temperatures connected by a vertical line whose top is the higher temperature
and whose bottom is the lower temperature.
2.
3.
If the chart is zoomed out further than 2X to say Zoom = 6X, the measurements
(in this case all 32 of them) will appear as a single vertical line with the highest
of the 32 temperatures being the top of the line and the lowest of the 32
temperatures as the bottom of the line. The TV2 can display between 1 and 512
measurements in each column. The
ZOOM-OUT
green triangle can be touched
ten times (Zoom=10X), which will show the maximum amount of data. This
method of displaying multiple measurements in the same column allows the TV2
to display large amounts of data in the same way that stock prices are displayed
with high-low bars covering a period of time.(Not sure where you actually
wanted this cut off)
9.
Can I use wireless sensors inside fridges and freezers?
a.
Sensors with internal Thermistors can be used within a fridge but the range is
dramatically shortened, and the cold temperature will shorten the battery life of the
sensor. They will not work from within walk-in refrigerators or freezers.
b.
Sensors with external Thermistors or thermocouples are made to be used with freezers
and refrigerators. All external sensors have two parts. The transmitter (the black box
with the battery) that is placed outside the fridge or freezer, and the actual sensor
which is attached to the transmitter by a thin wire. Only the actual sensor should be
placed inside the freezer.
10.
What is the purpose of the sensor serial number?
The sensor serial number shown on the Sensor Setup menu and the current status
screen is a channel number between 1 and 256.
Do not link sensors with the same
channel number to the same TV2.
Each sensor linked to a TV2 must have a unique
channel number. If you do have two sensors with the same serial number return one
of them to the factory for reprogramming.
11.
What type of wireless sensors can be used with TV2?
a.
Interior thermistor – The thermistor is mounted inside the black sensor pod along with
the transmitter. These are most often used inside rooms or containers kept at room
temperature.
b.
Interior thermistor & humidity – Thermistor and RH sensors are mounted directly on
the board inside the black sensor pod along with the transmitter. These sensors are
normally used to measure room temperature and humidity.
