25-Seven Systems program delay manager, Руководство оператора

Страница: 58 / 64

58 25-Seven Program Delay Manager Version 2.3 Manual April 2013
••
Remember: on the
Axia Dest
screen, you decide which signal this PDM is the
destination
for. Enter the channel number of
some other source
on the net-
work. PDM will treat that source as its input.
Once you’ve set an address in this screen, PDM checks the network and makes sure the
address is valid.
••
If that address isn’t valid, the front panel
AUDIO
LEDs remain amber.
••
If the address is valid but the source isn’t passing audio, the LEDs go dark.
••
If there is a valid a valid audio signal, the LEDs light green to indicate its level.
••
You can also check the signal flow by putting PDM in real-time play, feeding it
a signal, and listening to PDM’s Source Address on any Axia control surface or
other monitor point.
Your PDM’s output must be designated a
source 1
before other devices on the network
can listen to it. Assign it a channel number in the
Axia Source
screen. Other devices
will be able to hear PDM’s output by using this channel number as an assigned Destina-
tion signal.
Select
Axia Src Ch.
from the
Axia
menu. The LCD will look like this:
Axia Source Channel:
This screen lets you set the Livewire Source channel.
Pgm1@ LivewireStudio
As you scroll through channel numbers, this line shows the name
of each device available on the Axia network
00220 OK
Use
Î
or
¨
buttons to change channel numbers by single digits.
Use
Ò
or
‰‰
to jump by 100’s.
{}““‘‘Chg value CNCLX
Confirm your choice with or press

to cancel.
Livewire GPIO
PDM-Axia units provide up to 20 inputs and 20 outputs of Livewire IP-based GPIO, with
separate function choices for each. This is in addition to the parallel DB-25 GPIO sup-
plied with all PDMs (page 27). The two interfaces can be programmed and used inde-
pendently.
The Livewire GPIO is configured from PDM’s Graphical User Interface, on a networked
computer.
Log into the GUI (page 31) and click the
CONFIGURATION
tab. In addition to the functions
described on page 35, Axia equipped PDMs have the options in the following screen-
shot.
1
Again: we’ve followed Axia’s standard for signal names, to keep setup as simple as possible.