247Security ZEUS TITAN Скачать руководство пользователя

Страница: 43 / 48

247securityinc.com

1.866.693.7492

CONNECTIONS

247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA

Pg.43 of 47

REAR CONNECTIONS

POWER and BATTERY Loopback

(UPS operation)

The ZEUS TITAN has a built-in intelligent power circuit that can operate from +6.5v ~ +16V DC-IN.

A constant 12v Ignition and Ground are required. The DVR is energized by the vehicle’s ignition

signal and triggers start up, power shut-down delay and the timing circuitry. TITAN will remain

ON until the ignition signal has been turned off and the shut-down delay time has been reached.

The system will then go into Standby mode for the set period, then through its normal shutdown

procedures before completely powering down.

TITAN has an on-board battery system (“UPS” or uninterruptable power supply) for providing

backup power for up to 15 minutes after the main power has been lost. The UPS battery will

also keep the DVR running in case of voltage spikes (greater then 16VDC) and voltage drops

(less then 8VDC).

The Battery Loopback must be connected so the UPS battery can charge. Installers connect the

battery loopback to the DVR after the device has been fully installed and connected to the vehicle

power source.

Remove the loopback plug and store with the DVR when removing the DVR from the vehicle or

disconnecting the vehicle’s battery for extended periods of time.

Содержание ZEUS TITAN

















































Результаты поиска

Содержание ZEUS TITAN

Отзывы:

Похожие инструкции для ZEUS TITAN

Бренды по названию

Популярные бренды

247Security ZEUS TITAN, Руководство пользователя

Результаты поиска

Содержание ZEUS TITAN

Отзывы:

Похожие инструкции для ZEUS TITAN

Бренды по названию

Популярные бренды