247securityinc.com
1.866.693.7492
CONFIGURATION MENUS
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA
Pg.16 of 47
EVENT MARKER
This drop-down list selects the sensor to use for the event marker.
The Event Marker (Sensor 1) is the default sensor to be used with
the included event marker cable unless there is a required custom
solution to use a different sensor.
EVENT MARKER
This field tells TITAN what type of button configuration that is being
used for the installed
Event Marker
. There are 2 types of Event
Markers, each has a separate wiring configuration.
PRE-LOCK TIME (S) & POST-LOCK TIME (S)
“
Pre-Lock Time
” and “
Post-Lock Time
” (in seconds) defines how many seconds are included in the
event before and after the button push (or triggered event).
For instance, with settings of “60” in both fields, if the Event Marker Button was pressed at 8:30am,
the video event file is marked from 8:29am until 8:31am. It is recommended that both fields be set to
30 (seconds).
STOP RECORDING WHEN PLAY BACK / LIVE VIEW
This option disables recording when the TITAN is accessed by DVRViewer Pro either to Play Back
videos or for a Live View of cameras. Checking these boxes improves simultaneous multiple video
channel viewing, however video content may be lost if it stops recording.
