247Security ZEUS TITAN Скачать руководство пользователя

Страница: 32 / 48

247securityinc.com

1.866.693.7492

CONFIGURATION MENUS

247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA

Pg.32 of 47

FIRMWARE UPDATE

NOTE: THIS INFORMATION IS FOR REFERENCE ONLY!

The update process should only be done by a qualified technician under the direction of

technical support. You can seriously impair the functionality of your TITAN.

Firmware updates may contain new features and

improvements. If the update process is not done

correctly, your DVR may fail to start or function

properly and must be returned to your dealer

for repair.

Remove Hard Drive / DHD

a. If DVR is running, turn the key lock to

OPEN

postion and wait until DVR shits down. Both

POWER and REC LEDs

must be off. If the vehicle is idling or on

Accessory

, the

IGNITION

light will be on.

b. Open the door (Note: Leave it open during upgrading process).

c. Remove hard drive by pulling the tray straight out from the DVR until it’s free from the rails.

d. Turn the key lock to the

LOCK

postion and wait until TITAN boots up. The DVR has finished

booting when both

IGNITION and POWER LEDs

(green) are on solid. The engine can be idling

or in

Accessory

mode.

Connect to DVR and Save Current Configuration

a. Follow the first 2 steps from

“CONNECT TITAN TO PC/LAPTOP” on page 8.

b. Launch your browser and delete all browsing history including history, temp files, cookies

and web form information; or go to Configure DVR in DVRVIewer Pro.

c. Go to “

http://192.168.1.100/

” to access DVR setup.

d. At the login page, type “

admin

” as the User Name and “

admin

” as the Password.

e. Go through each page and manually record on paper all the settings, it is very important to

record the correct DVR Server Name.

f. Download the configuration file, see

DOWNLOAD CONFIGURATION on page 30

Choose the Firmware Update File

a. Click the “

Choose File

” button and browse to the location on your computer where you have

the firmware file saved.

A brief reminder, if Tech Support did not send you an update,

DO NOT PROCEED

. The name of

the firmware update file will always start with “

HOST_DEP

”.

Note:

the firmware update will set DVR to factory default settings.

Update Firmware

a. Click the “

Update Firmware

” button. After about 10 seconds you should see the message

“

Updating firmware…DVR will reboot itself please wait for 300

seconds

”, and the time will be counting down to 0 seconds.

b. Once the web page shows 0 seconds, press

RESET

on the

TITAN front panel and wait for DVR to boot-up.

c. After DVR boot-up, both

ignition LED (green)

and

Power LED

(green)

should be on solid.

Содержание ZEUS TITAN

















































Результаты поиска

Содержание ZEUS TITAN

Отзывы:

Похожие инструкции для ZEUS TITAN

Бренды по названию

Популярные бренды

247Security ZEUS TITAN, Руководство пользователя

Результаты поиска

Содержание ZEUS TITAN

Отзывы:

Похожие инструкции для ZEUS TITAN

Бренды по названию

Популярные бренды