A. LOCATION OF PARTS AND CONTROLS
1. Control Panel
2. Shiatsu Nodes
3. Positioning Handles
4. DC Power Port
5. Power Adapter
6. Car Adapter
15. To avoid the risk of electric shock, do not disassemble or attempt to repair
the a ppliance. Incorrect repair can cause risk of electric shock or injuries
when the unit is used.
16. Never remove the plug from the outlet by pulling the power cord.
SAVE THESE INSTRUCTIONS
B. USING THE MASSAGER
1. Connect the Power Adapter into the DC Power Port then plug the
Power Adapter into the electic outlet.
2. Grip the Positioning Handles and drape the main unit around your neck
with the Shiatsu Nodes in the center of your back.
4. Press the Auto Reversing Mode button to switch the Shiatsu Nodes
between Auto Reversing Mode and Single Direction Mode.
5. Press the Heat button to activate heat; press it again to deactivate
heat.
6. Use the Positioning Handles to reposition the Shiatsu Nodes to other
areas of the neck and back.
3. Press the ON/OFF Button, the massager immediately starts in
Auto Reversing Mode.
1
3
2
4
5
6
7. Press the ON/OFF button at any time to turn the unit off.
8. The unit shuts off automatically after 20 minutes of continuous use.
NOTES: Using the heat function for more than 20 minutes at a time is NOT
recommended. Allow the massager to cool between heat cycles.
ON/OFF
Auto Reversing Mode
Heat
- 03 -
- 04 -
EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
