100FIT 140T, Инструкция по эксплуатации

Страница: 11 / 28

after a complete stop; distance, Calorie mode forward timing from 0:00-99:59,
timing to 99:59 after clearing to continue to run; countdown will decrement
from the set time to zero, when the countdown to 0:00, the treadmill will slow
down smoothly Stop running, and enter the standby state 5 seconds after it
stops completely.
When the athlete holds the heartbeat sensing handle with both hands, the
system can automatically detect the athlete's heartbeat frequency and display
it in this window. The heartbeat value display range: 50-200 beats/min. (The
data is for reference only and cannot be regarded as medical data.)
5. "CAL." window:
Displays the calorie consumption value of the athlete. When the calorie
consumption value is displayed, the value will be from 0.0-999 in the forward
counting, and will be cleared after overflow to continue running; in the reverse
counting, it will count down from the set value to 0, when it will count down to
0 When the treadmill steadily slows down and stops running, it enters the
standby state 3 seconds after it stops completely.
2. Button function:
1. "PROG" is the program key: in the standby state, press this key to cycle to
select "P01-P02-...-P12-HP1-HP2-FAT".
"P01-P18" are built-in programs.
"HP1-HP2" is the heart rate speed control program.
"FAT" means fat measurement.
2. "MODE" is the mode selection key: press this key to select "0:00", "30:00",
"1.0", "50.0" ("0:00" is manual mode, "30:00" It is the time countdown mode,
"1.0" is the distance countdown mode, and "50.0" is the calorie countdown
mode.) When selecting various modes, you can use the speed and slope plus
and minus keys to set the relevant countdown value. After finishing, press
"START" button to start the treadmill.
3. "START" is the start button: when the power is turned on and the safety lock
is engaged, press this button at any time to start the running of the treadmill.