CONTOUR CT28 WALL & CEILING INSTALLATION
Figure 118. Positioning the CT28 for the required
coverage (-30° shown).
•
As one person holds and tilts the speaker enclosure, the second
operator should help to align the holes in the bracket to apply
the required tilt angle (see the figure and examples).
Figure 119. The tilt-locking holes and their
corresponding angles in the ceiling-mounted
configuration (0° = parallel to ceiling).
Figure 120. The tilt-locking holes and their
corresponding
angles
in
the
wall-mounted
configuration (0° = perpendicular to wall).
Attention: Use the Angle Bar for a vertical wall-mount
installation only if a downward tilt angle greater than -45° (down
to -75°) is necessary. For tilt angles from +45° to -45°, use the
Horizontal Mounting Bracket installed directly to the wall. (on
page 22)
Figure 121. Example alignment of an even angle
(-40° ceiling mount shown).
Содержание Contour CT28
Страница 1: ...Contour CT28 Wall Ceiling Installation...
Страница 50: ......