10
11
Power Management Function
The turntable will automatically go into standby mode after 20 minutes of inactivity.
To resume operation, simply press the power switch off, then press it to the "ON"
position after 1 second.
Turntable Operation
1. After connecting to power, press the power switch to the “ON” position.
2. Remove the stylus protector from the stylus.
3. Place the slip mat on the platter and place a record on the slip
mat. If using 45 RPM records, put the 45 RPM adapter on the center
spindle before placing the record on the platter.
4. Set the 33/45 RPM Selector according to the type of record.
45RPM Adapter
5. Turn the Start/Stop dial to the Start position. The platter will start spinning.
6. Unlock the tonearm clip and set the Lift Lever to the up position.
7. Position the tonearm over the desired location (groove) on the record.
8. Move the tonearm lift lever to the down position to move the tonearm toward the
record. Alternatively, place the needle over the desired location on the record.
9. Carefully lower the tonearm on the record.
10. When you are finished playing the record, raise the tonearm, return it to rest on the
arm clip, and turn the Start/Stop dial to the Stop.
Bluetooth Operation
This turntable has a Bluetooth transmitter to wirelessly send audio to a Bluetooth
speaker.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the turntable. BT will auto search when the turntable turns on and the BT
LED indicator light will flash.
3. When pairing, the light will flash twice per second and will become solid when
paired successfully.
4. To disconnect pairing, power off the turntable or turn off Bluetooth pairing on your
Bluetooth speaker.
5. This turntable will connect to the nearest Bluetooth speaker. If after 2 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become
inactive and the LED will turn off. If you need to connect again, power off the turntable
and the speaker then power on again.
Bluetooth Indicator
Bluetooth Stauts
Flash
Auto searching and pairing
Solid
Paired successfully
Off
Inactive
NOTE:
1. The initial connection may take longer, usually between 30 to 80 seconds. After a
successful connection, the subsequent connection time will be shortened to 10
seconds. Please be patient and wait.
2. The Stop/Start Dial can only control the operation of the platter.
To control music
streaming through Bluetooth, please use the control panel of your media
device.
Recording the Vinyl to Your Computer
Please follow the below steps to set up Audacity to record from the USB audio device.
For more details, please refer to the BRIEF INTRODUCTION OF AUDACITY at https://
manual.audacityteam.org/man/recording_with_usb_turntables.html
1. Download the Audacity software and complete installation
1.1 Ensure your Audacity software is up to date
. You can download the current
version from http://www.audacityteam.org/download/
1.2 Follow the instructions to complete installation.
2. Set up Audacity to record from the USB audio device.
2.1 Connect the USB device
Use the supplied USB cable to connect your turntable and your computer. No
extra driver is required.
2.2 System settings needed for Windows and Mac