1 BY ONE 1-AD07US01 Скачать руководство пользователя страница 2

1

 Introduction 

Thank you for purchasing the 1byone Belt Drive Turntable System. This instruction 
manual contains important information about its safety, usage and disposal. Use 
the product as described and keep this manual for future reference. If you sell this 
turntable or pass it on, please also give this manual to the new owner. 

 Safety Instructions

Read and understand this entire manual before using this product. Keep these 
instructions for future reference.
1. Do not use the turntable near water.
2. Only connect the turntable to a power outlet type as indicated on the marking 

label or in the "Specifications" section of this instruction manual.

3. The turntable has a polarized plug (one pin is wider than the other). To reduce the 

risk of electric shock, this plug is intended to fit into a polarized outlet in only one 
orientation. If the plug does not fit fully into the outlet, reverse the plug. If it still 
does not fit, contact a qualified electrician. Do not attempt to modify the plug in 
any way.

4. Protect the power cord from being walked on or pinched, particularly at the power 

plug, at the point of connection between the plug and outlet and at the point of 
connection between the power cable and speaker.

5. Do not overload wall outlets or extension cords as this will be a fire hazard and may 

cause electric shock.

6. Never push objects of any kind into the turntable through openings as they may 

touch dangerous voltage points or short out parts that could result in a fire or 
electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service the turntable yourself as opening or removing body 

panels may expose you to dangerous voltage or other hazards. Refer all servicing to 
qualified service personnel.

8. Changes or modifications to the turntable not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the product.

9. Do not use attachments not recommended by the manufacturer as they may cause 

hazards.

10. Only place on a flat, sturdy table or use with the cart, stand, tripod or 

bracket as specified by the manufacturer or sold with the turntable. 
When a cart is used, use caution when moving the cart/turntable 
combination to avoid injury from tip-over.

Содержание 1-AD07US01














Отзывы: