18
19
7. Using your hands, slowly rotate the platter ten times in a clockwise
direction as shown by the arrow below.
Cartridge Replacement
1. Before replacement, put the stylus protector back on the stylus to prevent damage
to the stylus during the replacement process.
2. Carefully remove the wire leads from the original cartridge.
3. Loosen the two screws on the headshell that are securing the cartridge and then
remove the original cartridge.
4. Mount the new cartridge to the headshell and tighten it lightly. Do not completely
tighten the screws at this moment.
5. Connect the wire leads to the new cartridge’s terminals .The wire lead color codes
are as below:
Wire
Channel
White
Left channel positive (L+)
Black
Left channel negative (L–)
Red
Right channel positive (R+)
Black
Right channel negative (R-)
6. Adjust the cartridge’s position to make sure it is precisely aligned on the headshell
so that the stylus will be tracking the grooves in parallel perfectly.
To achieve this, place the included paper
cartridge alignment protractor
over
the turntable spindle, carefully lift the tone arm and place the tip of the stylus on the
points marked 130mm and 250mm respectively. Fine tune the cartridge’s position
on the headshell until the cartridge is perfectly in parallel with the reference lines at
both points.
7. Tighten the screws completely once the perfect alignment is achieved.
NOTE:
If you are unfamiliar or uncomfortable with completing this procedure, we
recommend consulting with a professional to perform the installation.
When the Turntable is Moved
Using the product's original packing materials, wrap the turntable in the reverse order
from when you unwrapped it. If you do not have the packaging materials, take the
following measures:
• After disconnecting the AC adapter from the outlet, remove the felt mat and platter,
and then wrap them so that they do not get damaged.
• Attach the protector to the cartridge.
• Use a string or something similar to tie the tonearm to the rest so that it does not
become dislodged.
• Wrap the turntable body with paper or a soft cloth so that it does not get damaged.
Technical Specifications
Turntable
Model
1-AD07US01,H005
Speed Variance
±1.5%
Nominal Speeds
33 1/3 & 45RPM
Wow and Flutter
≤0.15%
Effective Tonearm Length
8.6” (218.5mm)
Signal to Noise
55dB
Tracking Force Range
3.0-6.0g
Overhang
0.73in
Outboard Power Supply
12V/ 500mA AC-DC
Power Consumption
5W
AC Power Adapter
Input: 100-240V 50/60Hz, Max. 200mA
Dimensions (W x H x D)
16.34” x 10.2” x 4.44” (415 x 340 x 148mm)
Weight
13.67lbs (6.2kg)
Cartridge
Stylus Model
Audio Technica AT-3600L
Frequency Response
20Hz-20kHz
Recommended Load Resistance
47kohms
Channel Balance
＜
2.5dB
Amplifier Connection
MM - input
Channel Separation
＞
18dB
Recommended Tracking Force
3.5±0.5g
Output Voltage
2.5mV
Weight
5g