background image

model number 060-2385-8 | contact us: 1.866.523.5218

Leaf Blower & Vacuum

 

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual 

before using this product. If you do not understand the warnings and instructions in the operator’s 
manual, do not use this product.

READ AND SAVE THIS MANUAL. This manual contains important safety precautions which should be 
read and understood before operating the product. Failure to do so could result in serious injury. This 
manual should remain with the product. Specifications, descriptions and illustrations in this manual are 
as accurate as known at the time of publication, but are subject to change without notice.

 

NOTICE: Do not use E15 or E85 fuel (or fuel containing greater than 10% ethanol) in this product. 

It is a violation of federal law and will damage the unit and void your warranty. FUEL MIXTURE for this 
product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle oil in a 40:1 ratio. 
Pre-mix unleaded gasoline and 2-cycle engine oil in a clean container approved for gasoline. DO NOT 
mix quantities larger than usable in a 30-day period.

Summary of Contents for 060-2385-8















































Reviews: