www.waferlock.com
■ Digital Locking Cylinder X 1
External Knob Dimensions: 47 (L) x 35.8 (D)mm
■ Batteries X 1
( CR2 )
Parts list for the C700 Cylinder
■ L shape 1.5mm Hex Screw Driver
■ C7 Tool ( optional )
Waferlock Screw Driver for C700 Cylinder use
■ M5 Screw x 1
C-700 Series
Cylinder
Digital Locking
User Manual
■ Internal Knob x 1
(Dimensions: 25 (L) x 32 (D)mm )
1
Battery Replacement
2
3
knob ring
white strap
Use the C7 screw driver to find and match
2 holes of external knob.
( There are 4 holes alongside of external
knob )
One hand holds the knob cover and the
other hand turns the tool counter-clockwise
until the knob ring is loosed from the knob,
then pull out the metal cover.
Insert CR2 x 1 battery into the knob and
make sure that the white strap is properly
under/cross the battery. ( The strap will
help you to pull ou the battery easily )
4
Place the metal cover back to the knob by
matching the cover hint hole with knob
raised edge properly.
5
Turn the knob ring clockwise with the C7
tool to tighten the knob ring back insdie
the knob properly.
