HARDW
ARE INCLUDED
Screwdriver
TOOLS, HARDW
ARE, & P
A
R
TS INCLUDED
P
A
R
TS BOX
W
ater Bottle, Qty: 1
Hear
t Rate Chest Strap, Qty: 1
Color-coded Hardware Bags
Owner’
s Guide
Assembly Guide
W
a
rranty Card
8
MM
Allen W
rench
ORANGE BAG
BLUE BAG
M8 x 135L Bolts
Quantity: 4
M8 x 15L Bolts
Quantity: 4
Assembly
Guide
T9500HR
T
AND
T9700HR
T
PLA
TFORM TREADMILLS
©
2004 V
ision Fitness. All Rights Reser
ved. 8.03 Par
t #Z92TM49-AG1812PRD
AG18.12PRD
REV3 Mar
.03.04
M8 x 55L Flathead Bolts
Quantity: 4
YELLOW BAG
M4 x 12L Panhead Screws
Quantity: 6
M8 x 20L Bolts
Quantity: 2
5mm L-Shaped W
rench
4
STEP
Once the treadmill is plugged in, you need to per
for
m
an Auto-Calibration to assure maximum per
for
mance.
MODELS T9500HR
T:
DO NOT ST
AND ON THE BEL
T WHEN PERFORMING THE AUTO-CALIBRA
TION
• Y
ou need to access User Engineering Mode to run the Auto-Calibration. With the Safety Key in place, please
hold down SPEED DOWN and SELECT for 5 seconds. When in the User mode, "USEr" displays in the center
window
. T
o access the data press the ELEV
A
TION keys until "Auto" appears in the center window
. Press Star
t to
select this function.
• T
o begin Auto-Calibration, press ST
AR
T.
The treadmill will run through minimum and maximum Speed and
maximum Elevation. This will take 3-5 minutes. Let the treadmill per
for
m
this complete function before exiting the
Engineering Mode.
• Elevation A/D or Elevation in % appears in the left window
. PWM value or Speed appears in the right
window
. "End" will appear in the center window when the Auto-Calibration is complete. When Auto-Calibration
is complete, it will take the treadmill about 30 seconds to go to 0% Elevation and retur
n to the star
t-up screen
with “P1” showing in the Function window
.
MODELS T9700HR
T:
DO NOT ST
AND ON THE BEL
T WHEN PERFORMING THE AUTO-CALIBRA
TION
• Y
ou need to access User Engineering Mode to run the Auto-Calibration. With the Safety Key in place, please
hold down SPEED DOWN and SELECT for 5 seconds. When in the User mode, "User Mode" appears in the
alphanumeric window
. T
o access the data press the ELEV
A
TION keys until "Auto-Cal" appears. Press Star
t to select
this function.
• T
o begin Auto-Calibration, press ST
AR
T.
The treadmill will run through minimum and maximum Speed and
maximum Elevation. This will take 3-5 minutes. Let the treadmill per
for
m
this complete function before exiting the
Engineering Mode.
• Elevation A/D or Elevation in % appears in the left window
. PWM value or Speed appears in the right
window
. "Cal Passed" will appear in the alphanumeric window when the Auto-Calibration is complete. The
treadmill will come to a complete stop and retur
n to the star
t-up screen in the alphanumeric window
.
AUTO CALIBRA
TION
