Swimming Pool Treadmill
(Model: A-2000)
Set-up Instructions and Operation Manual
Congratulations!
Enclosed is your Aquabilt Treadmill.
Please read the following set-up and operating instructions and make this information
available to each user of your Aquabilt Treadmill.
1. Carefully unpack the treadmill and handrail from the shipping carton.
2.
Check for any signs of shipping damage.
If found, report to the carrier
immediately.
3.
Please retain your shipping carton
until you have used the treadmill and are
completely satisfied.
4. Review the easy set-up and operating instructions below.
Treadmill Set-up
1. After removing the treadmill from the shipping
carton,
place the treadmill flat on the floor
. If the
Aquabilt logo on the side panel is upside down, you
need to flip over the treadmill to orient it correctly.
2.
Install the metal handrail by positioning the U-
shaped end vertically and
pointing slightly
forward of the roller on the higher end of the
treadmill
(i.e. towards the front of the treadmill)
and inserting the two metal ends of the handrail
over the white guide tubes located in the mounting
sockets and pushing down.
The Aquatic Treadmill is now ready to use!
