AIR CONDITIONER (SPLIT TYPE)
Owner’s Manual
Simple wired remote controller
Model name : RBC-AS41E
Wired remote controller model name
SX-U01EE
1
Precautions for safety
WARNING
Installation
• Make sure to ask the qualified installation professional in electric work to install the remote controller.
If the remote controller is inappropriate installed by yourself, it may cause electric shock, fire or other trouble.
• Make sure to install the air conditioner specified by TOSHIBA and ask the exclusive dealer when installing. If the air
conditioner is installed by yourself, it may cause electric shock, fire or other trouble.
Operation
• When you are aware of something abnormal with the air conditioner (such as smells like something burning),
immediately turn off the main power supply switch or circuit breaker to stop the air conditioner, and make contact with
the dealer.
If the air conditioner is continuously operated with something abnormal, it may cause machine failure, electric shock,
fire or other trouble.
Reinstallation and repair
• Do not repair any unit by yourself.
Whenever the air conditioner needs repair, make sure to ask the dealer to do it.
If it is repaired imperfectly, it may cause electric shock, fire or other trouble.
• When reinstalling the air conditioner, contact with the dealer.
If the installation is insufficient, it may cause electric shock, fire or other trouble.
CAUTION
Operation
• Prevent any liquid from falling into the remote controller.
Do not spill juice, water or any kind of liquid.
It may cause machine failure, electric shock, fire or other trouble.
• Do not directly spray the remote controller with flammable spray.
Doing so may cause a fire.
• Do not push the switches with the aforementioned sharp object.
Doing so may cause a short circuit or malfunction.
Thank you very much for purchasing TOSHIBA remote controller for air conditioner.
Please read this Owner’s Manual carefully before using your remote controller for air conditioner
• Be sure to obtain the “Owner’s Manual” and “Installation Manual” from constructor (or dealer).
Request to constructor or dealer
• Please clearly explain the contents of the Owner’s Manual and hand over it.
2
The remote controller
Remote controller (SX-U01EE)
Indicators
All icons on the display are shown for this explanation.
Icons related to heating do not appear for cooling only
models. Operations are not accepted when “SETTING” is
flashing.
1
Operation mode indicator
Indicates the operation mode selected.
2
Operation standby indicator
Indicates that the Super Modular Multi System
cannot cool if a different indoor unit is heating or
cannot heat if one is cooling; and that the Super
Heat Recovery Multi cannot heat or cool because
the outside temperature is outside the operating
range.
3
Remote controller sensor indicator
Displayed when the remote controller sensor is
used.
4
Setting indicator
Indicates that the model is being checked
automatically after a breaker is thrown or some
other occurrence.
5
Fan speed indicator
Indicates the selected fan speed:
“
Auto”, “
High”, “
Medium”, “ Low” or
“
Fix”.
6
Test run indicator
Displayed during test run.
7
Louver position indicator
Indicates the louver position.
8
Pre-heat indicator
Displayed when the heating mode is energized or
defrost cycle is initiated.
While this indication is displayed, the indoor fan
stops or operate in fan mode.
9
Central control indicator
Displayed when the air conditioner is controlled
centrally and used with central control devices such
as the central remote controller.
If the use of the remote controller is prohibited by the
central control,
blinks when the ON/OFF,
MODE, or TEMP. button on the remote controller is
pushed, and the buttons do not function.
(Settings that can be configured on the remote
controller differ depending on the mode of the
central control. For details, read the Owner’s
Manual of the central remote controller.)
10
Temperature setting indicator
The selected set temperature is displayed.
11
Service display
Displayed while the protective device works or a
check occurs.
12
Check code indicator
When a check occurs, alternately indicates the
indoor unit number and the check code.
13
Swing indicator
Displayed during up/down movement of the louver.
Operations
14
Set louver and swing button
Set automatic swing or the angle of the louvers.
15
Fan speed button
Selects the desired fan speed.
16
Test button
Used for test runs and for servicing.
*Not normally used.
17
Mode select button
Selects desired operation mode.
18
ON/OFF button
Turns on the unit when pushed, and turns off when
pushed again.
19
Temperature setting button
Adjusts the set temperature.
Select the desired set point by pushing temperature
button.
20
Operation lamp
Lights during operations. Blinks when a check
occurs or the protective device activates.
21
Remote controller sensor
Normally, the indoor unit's temperature sensor
detects the temperature, but it can also detect the
temperature near the remote controller. For details,
contact your dealer.
• Do not set during group control.
13
18
21
19
20
14
6
16
17
2
5
4
3
15
12
11
10
1
8
9
7
+01EN01BODY.fm Page 1 Friday, December 21, 2012 10:46 AM
