Privacy Stand™
Applicable Products:
PVC3
PVC3C
PVC4
PVC4C
1. Attach stand-off to base using the screw provided.
2. Slide banners over crossbars.
3. Connect end uprights and lower crossbars to the stand-off
4. Connect internal uprights and lower crossbars to the stand-off.
5. Connect end upper crossbar to upright using the knob screw provided.
6. Connect internal upper crossbar to upright using the knob screw provided.
NOTE: Model shown below may differ in height and width from your model, but assembly instructions remain the same.
1.
2.
5.
6.
4.
3.
PVC3 Shown