Information
Brochure
Choose controls
to match
application
1
Application
Brochure
Design your
mechanical
applications
2
Rough In
Wiring
Rough-in
wiring
instructions
3
Wiring
Brochure
Wiring and
installation of
specific control
4
Data
Brochure
Control settings
and sequence of
operation
5
Job
Record
Record settings &
wiring details for
future reference
6
W 162
12/08
tekmarNet
®
4 Setpoint Control 162
- Wiring Brochure
1 of 8
© 2008
W 162 - 12/08
The following brochure describes how to wire the tekmarNet
®
4 (tN4) Setpoint Control 162. The 162 has two outputs, one
for heat or cool and the other for a recirculation pump. The 162 has one sensor input.
Definitions .......................................................................2
Rough-In Wiring .............................................................2
Remove the Wiring Cover ..............................................3
Mounting the Setpoint Control .......................................3
Wiring Symbols ...............................................................3
Electrical Drawings ......................................................3-5
Wiring the Setpoint Control .............................................6
Troubleshooting the Wiring .............................................7
Testing the Wiring ...........................................................7
Technical Data ................................................................8
Table of Contents
24 V ±10% 50/60 Hz 3.2 VA
24 V (ac) 2 A
Power:
Relays:
tN4 Setpoint Control 162
One Stage Heat / Cool
Feb 2006
Lot 1948
Meets Class B:
Canadian ICES
FCC Part 15
Cut jumper to
isolate relay
For product instructions see brochure
Use at least 194°F (90°C) conductors
/
Overview
Relay
Contacts
tN4 Network
24 V (ac) Power
Sensor Input
DIP
Switches
Jumper
